ABB Aztec 600 Color Скачать руководство пользователя страница 68

Страница: 68 / 110

Aztec 600 aluminium, ammonia, color, iron, manganese, phosphate

Single- and multi-stream colorimetric analyzers

13 Maintenance

IM/AZT6CR–EN Rev. R

5. Referring to Fig. 13.2:

a. Locate the waste valve

, identified by an orange

colored label

on the back of the valve.

b. Remove the 2 M3 screws

securing the valve to

the manifold and remove the valve. Discard the valve
face gasket

c. Using a small screwdriver, depress the retaining

clips

and remove the diaphragm seat

d. Turn the valve over and, taking great care not to lose

spring

, allow the diaphragm retainer

complete with washer

, diaphragm

and

spring

to fall out.

e. Remove the diaphragm

from the diaphragm

retainer

and discard.

f. Fit the new Kalrez diaphragm, ensuring washer

remains in place below the diaphragm.

g. Ensuring spring

is in place in the hole in

diaphragm retainer

, insert the diaphragm

retainer, complete with washer

and diaphragm

into the valve ensuring the spring remains in

position.

h. Press the diaphragm seat

into the valve body

until the retaining clips

lock into place.

i. Fit the new Kalrez valve face gasket

into the

recess in the diaphragm seat.

j. Refit the valve

to the valve manifold and secure

using the two M3 screws

k. Working in a clockwise or counter-clockwise

direction,  repeat  steps  b  to  j  for  the  remaining
valves,  replacing  the  diaphragms  and  valve  face
gaskets  with  the  new  EDPM  diaphragms  and
gaskets from the spares kit.

Note.

All valves, except the waste valve,

contain an EPDM diaphragm. The waste valve

must

be fitted with the KALREZ diaphragm.

Note.

The diaphragm seat retaining clips are

different widths to ensure that the diaphragm
seat fits in one position only.

Note.

All valves, except the waste valve, are

fitted with an EPDM valve face gasket. The
waste valve

must

be fitted with the KALREZ

valve face gasket.

Fig. 13.2 Removing the Waste Valve

Содержание Aztec 600 Color















































































































Результаты поиска

Содержание Aztec 600 Color

Отзывы:

ABB Aztec 600 Color, Руководство пользователя, Страница: 68 / 110

Результаты поиска

Содержание Aztec 600 Color

Отзывы: