4
Advance Optima Ex Analyzer Modules Operator’s Manual
42/24-12-2 EN
General Safety Precautions
Requirements for
Safe Operation
In order to operate in a safe and efficient manner, the Ex analyzer module should
be properly handled and stored, correctly installed and set-up, properly operated
and carefully maintained.
Personnel
Qualifications
Only persons familiar with the installation, set-up, operation and maintenance of
comparable equipment and certified as being capable of such work should work
on the Ex analyzer module.
Special Information
and Precautions
These include
•
The content of this operator’s manual.
•
The safety information affixed to the Ex analyzer module.
•
Safety precautions for the installation and operation of electrical devices.
•
Safety precautions for working with gases, acids, condensates, etc.
•
Regulations, standards and guidelines for explosion protection.
National Regulations
The regulations, standards and guidelines cited in this operator’s manual are
applicable in the Federal Republic of Germany. The applicable national regulations
should be followed when the Ex analyzer module is used in other countries.
Ex Analyzer Module
Safety and Safe
Operation
The Ex analyzer module is designed and tested in accordance with EN 61010 Part 1/
IEC 1010-1, "Safety Provisions for Electrical Measuring, Control, Regulation and
Laboratory Instruments" and has been shipped ready for safe operation.
To maintain this condition and to assure safe operation, read and follow the safety
information identified with the
symbol in this manual. Failure to do so can put
persons at risk and can lead to Ex analyzer module damage as well as damage to
other systems and instruments.
Additional
Information
If the information in this operator’s manual does not cover a particular situation,
ABB Service is prepared to supply additional information as needed.
Contact your local ABB service representative or
ABB Service, Telephone: +49-1 80-5-12 35 80, Fax: +49-6 21-3 81-51 35,
E-mail: [email protected]
