ABB ACS580 Series, Руководство по оборудованию

Страница: 99 / 468

Requirements for ABB motors,
P
n
> 100 kW (134 hp)
See also Abbreviations (page 102) .
Requirement for Nominal AC line
voltage
Motor type
ABB d u/dt and common mode filters, in-
sulated N-end motor bearings
Motor insu-
lation sys-
tem
Pn ≥ 350 kW
or
frame size ≥
IEC 400
100 kW ≤ Pn < 350
kW
or
IEC 315 ≤ frame size
< IEC 400
Pn ≥ 469 hp
or
frame size >
NEMA 580
134 hp ≤ Pn <
469 hp
or
NEMA 500 ≤ frame
size ≤ NEMA 580
+ N + CMF + N Standard Un ≤ 500 V Random-wound
M2_, M3_ and
M4_
+ N + d u/dt + CMF + N + d u/dt Standard 500 V < Un ≤
600 V
+ N + CMF + N Reinforced
+ N + d u/dt + CMF + N + d u/dt Reinforced 600 V < Un ≤
690 V (cable
length ≤ 150 m)
+ N + CMF + N Reinforced 600 V < Un ≤
690 V (cable
length > 150 m)
Pn < 500 kW: +N +
CMF
+ N + CMF Standard 380 V < Un ≤
690 V
Form-wound HX_
and AM_
Pn ≥ 500 kW: +N +
d u/dt + CMF
+ N + d
u/dt with voltages over 500 V +
CMF
Check with
the motor
manufac-
turer.
380 V <
Un ≤
690 V
Old
1)
form-
wound HX_ and
modular
+ N + CMF Enamelled
wire with
fiber glass
taping
0 V <
Un ≤ 500 V
Random-wound
HX_ and AM_
2)
+ N + d u/dt + CMF 500 V < Un ≤
690 V
Consult the motor manufacturer. HDP
1) manufactured before 1.1.1998
2) For motors manufactured before 1.1.1998, check for additional instructions with the motor manufacturer.
Guidelines for planning the electrical installation 99