ABB ACS180-04S-03A7-1, Руководство по оборудованию, Страница: 138 / 192

Disposal
The main parts of the drive can be recycled to preserve natural resources and
energy. Product parts and materials should be dismantled and separated.
Generally all metals, such as steel, aluminum, copper and its alloys, and precious
metals can be recycled as material. Plastics, rubber, cardboard and other packaging
material can be used in energy recovery.
Printed circuit boards and DC capacitors need selective treatment according to
IEC 62635 guidelines.
To aid recycling, most plastic parts are marked with an appropriate identification
code. In addition, components containing substances of very high concern (SVHCs)
are listed in European Chemicals Agency's SCIP database. SCIP is the database for
information on Substances of Concern In articles as such or in complex objects
(Products) established under the Waste Framework Directive (2008/98/EC). For
further information, contact your local ABB distributor or consult European
Chemicals Agency's SCIP database to find out which SVHCs are used in the drive,
and to find out where those components are located.
Contact your local ABB distributor for further information on environmental
aspects. End of life treatment must follow international and national regulations.
For more information on ABB end of life services, refer to
new.abb.com/service/end-of-life-services .
Applicable standards
The drive complies with the following standards:
Safety of machinery – Safety related parts of the control systems –
Part 1: general principles for design EN ISO 13849-1:2015
Safety of machinery – Safety-related parts of the control systems –
Part 2: Validation EN ISO 13849-2:2012
Safety of machinery. Electrical equipment of machines. Part 1: Gen-
eral requirements. Provisions for compliance: The final assembler
of the machine is responsible for installing
• an emergency-stop device
• a supply disconnecting device
EN 60204-1:2006 +
A1:2009 + AC:2010
Safety of machinery – Functional safety of safety-related electrical,
electronic and programmable electronic control systems EN 62061:2005 +
AC:2010 + A1:2013 +
A2:2015
Adjustable speed electrical power drive systems. Part 3: EMC require-
ments and specific test methods EN 61800-3:2004 +
A1:2012
IEC 61800-3:2004 +
A1:2011
138 Technical data