ELECTRICAL INSTALLATION
PRODUCT
ACS1000W
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS213400 E01
REV.
J
LANG.
en
PAGE
91/166
4.
Prepare the cables as illustrated.
•
A
in Fig. 7
13 illustrates how cables with an outer cable screen or shield are
prepared for EMC bonding with the metal enclosure of the cabinet.
•
B
in Fig. 7
13 illustrates how cables without an outer screen or shield are
prepared.
Figure 7
-
13 Preparing cables for EMC plates: (A) cables with an outer screen or
shield, (B) cables without an outer screen or shield
5.
Enter the equipotential bonding conductor through an unused hole of the
entry plate.
1) Grommet
2) EMC sleeve
3) Cable tie
4) Heat-shrinkable termination
5) Outer cable sheath
6) Entry plate
7) Conductor insulation removed to expose
cable shield
8) Cable screen extension to connect to the
PE busbar
A
B
1
2
3
4
5
6
7
8
