Appendix A – Technical Data
ACA 635 IGBT Supply Sections
A-11
Control Panel
The Control Panel (CDP 312) is connected to 6-pin modular connector
X3 on the NAMC-21/22 board. The modular connectors on the NIOC
board are
not
intended for the Control Panel.
RS-485 Termination
Settings
When the Control Panel CDP 312 is connected to one NAMC-21/22
board only, the RS-485 line must be terminated on the NAMC-21/22
board by jumpers X5 as follows:
If the CDP 312 is connected to several NAMC 21/22 boards (RS-485
panel bus), the first and the last NAMC 21/22 board must be
terminated and the intermediate boards not terminated.
NLMD-01 Monitoring
Display
The NLMD-01 monitoring display is connected to 6-pin modular
connector X4 on the NAMC-21/22 board. The modular connectors on
the NIOC board are
not
intended for the monitoring display.
NIOC Board
Specifications
This table gives data for the external control connection board NIOC-
01 of the IGBT supply section. For external control connections of the
control section refer to Common Drive Control Manuals.
IGBT Supply Section NIOC-01 Board
Constant Voltage Output
Voltage:
10 VDC ± 0.5 % (Full-scale Range) at 25 °C. Temperature Coefficient:
± 100 ppm/°C, max.
Maximum Load:
10 mA
Applicable Potentiometer:
1 k
W
to
10 k
W
Auxiliary Power Output
Voltage:
24 VDC ± 10 %, Short-circuit proof
Maximum Current:
250 mA or 130 mA with NLMD-01 option
Analogue Outputs
Two Programmable Current Outputs:
0 (4) to 20 mA,
R
L
< 700
W
Resolution:
0.1 % (10 bit)
Inaccuracy:
±
1 % (Full-scale Range) at 25
°
C. Temperature Coefficient:
±
200 ppm/
°
C, max.
Output Updating Time:
4 ms
Digital Inputs
Six Digital Inputs (Common Ground):
24 VDC, -15 to +20 %
Logical Thresholds:
< 8 VDC
“0”, > 12 VDC
“1”
Input Current:
DI1 to DI 5: 10 mA, DI6: 5 mA
Filtering Time Constant:
1 ms
Internal Supply For Digital Inputs (+24 VDC):
Short-circuit proof, group isolated
Isolation Test Voltage:
500 VAC, 1 minute
Input Updating Time:
10 ms
An external 24 VDC supply can be used instead of the internal supply.
Terminated
Not terminated
Содержание ACS 600 MultiDrive
