ABB ACS 600 MultiDrive, Руководство пользователя

Страница: 68 / 109

Chapter 8 – Parameters
ACA 635 IGBT Supply Sections 8-11
15 Analogue Outputs
Code Parameter T
y
p
e Default Alternative Settings
( ) Fieldbus Equivalent
Description Integer
Scaling
15 ANALOGUE
OUTPUTS
15.01 ANALOGUE
OUTPUT 1 I 106 0...30000 Analogue output signal 1 source selection.
Example: To link Par. 23. 01 DC VOLT REF to
analogue output 1, set Parameter 15.01 to
value 2301. 1 = 1
15.02 INVERT AO1 B NO (0) NO; (1) YES Analogue output signal 1 inversion
15.03 MINIMUM AO1 I 0 mA (1) 0 mA; (2) 4 mA;
(3) 10 mA
Analogue output signal 1 offset in
milliamperes
15.04 FILTER AO1 R 0.10 s 0...10 s Filter time constant for AO1 100 = 1 s
15.05 SCALE AO1 R 100 0...65536 Nominal value of AO1 (Par. 15.01
ANALOGUE OUTPUT 1). It corresponds to
20 mA at the output.
Example: Par. 1.06 LINE CURRENT is linked
to Parameter 15.01 ANALOGUE OUTPUT 1.
The value of Par. 15.05 is 100. When the
value of Par. 1.06 LINE CURRENT is 100 A,
the output of AO1 is 20 mA. 1 = 1
15.06 ANALOGUE
OUTPUT 2 I 101 0...30000 Analogue output signal 2 source selection.
See example in Par. 15.01. 1 = 1
15.07 INVERT AO2 B NO (0) NO; (1) YES Analogue output signal 2 inversion
15.08 MINIMUM AO2 I 0 mA (1) 0 mA; (2) 4 mA
(3) 10 mA
Analogue output signal 2 offset in
milliamperes
15.09 FILTER AO2 R 0.10 s 0...10 s Filter time constant for AO2 100 = 1 s
15.10 SCALE AO2 R 3000 0...65536 Nominal value of AO2 signal (Par. 15.06
ANALOGUE OUTPUT 2). It corresponds to
20 mA at the output. See example in Par.
15.05. 1 = 1