Commissioning
System Manual 2CKA001473B5074
│31
3
Commissioning
3.1
Overview of commissioning
During commissioning it is differentiated between the commissioning of the system devices
("Smart Access Point Pro", "RF/IP Gateway" and "RF Repeater") and the adding and
commissioning of "Electronic cylindrical lock".
If the "Smart Access Point Pro" or the building structure already exists, e.g. in a "ABB-Welcome
IP" system, this part of commissioning is dropped. The same applies when a device is not
required in the planned system. The further steps can be carried out directly in the management
software of the "Smart Access Point Pro".
Step 1
Initial
commissioning of
"Smart Access
Point Pro"
see chapter 3.1.4 “Commissioning the "Smart Access Point"“ on page 36
Step 2
Creating the
building structure
see chapter 5.2 “Building structure“ on page 95
Step 3
Placing of "Smart
Access Point Pro"
■
Placing the "Smart Access Point Pro" in building structure of the
management software:
– see chapter 5.4.1 “Placing the "Smart Access Point Pro"“ on page
114
Step 4
Commissioning of
"RF/IP Gateway"
■
Commissioning the "RF/IP Gateway" in the management software of
the "Smart Access Point Pro":
– see chapter 3.2.3 “"RF/IP Gateway"“ on page 55
Step 5
Commissioning of
"RF Repeater"
■
Commissioning the "RF Repeater" in the management software of the
"Smart Access Point Pro":
– see chapter 3.2.4 “"RF Repeater"“ on page 56
Step 6
Adding "Electronic
cylindrical lock"
■
Commissioning the "Electronic cylindrical lock":
– see chapter 3.2.1 “"Electronic cylindrical lock"“ on page 51
– The "Electronic cylindrical lock" is already mounted: see chapter
5.3.2 “Add "Electronic cylindrical lock"“ on page 105
– "Electronic cylindrical lock" is not yet mounted: see chapter
3.2.2 “Adding larger projects / devices in advance“ on page 55
