Commissioning
Product manual 2CKA001473B5285
│
40
Pos. Description
[1]
Links
Under the "Links", you can create, delete or edit links. You can also see for which
devices a link was created. A difference is made between links of channels and scenes.
■
A list opens when tapping the plus icon in front of the channel or scene. Create the
desired link in the list by tapping the desired device.
■
The link can be deleted again by tapping on the dustbin icon.
[2]
Function
The function is selected automatically in dependence of the selected link. It can be
changed if necessary.
■
Blind operation
For the control of movement commands
■
Blind blockage
The blind is moved into the "Top" or "Bottom" state and locked against any further
operation. After cancelling the forced control, the blind returns to its original state.
[3]
Parameters
LED switch-on brightness, night [%]
The brightness of the sensor LED for the
night can be specified with the sliding
controller or input in the text field.
LED switch-on brightness, day [%]
The brightness of the sensor LED for the day
can be specified with the sliding controller or
input in the text field.
LED operating mode
Notice:
Please observe that the automatically
created time profile for the day/night
switchover is activated.
The following setting options are available
for the LED operating mode:
■
Light for orientation:
The LED lights up permanent.
■
Status display:
The LED lights up when the actuator is
switched on, and the LED is off when the
actuator is switched off.
■
Status display with light for orientation:
If the actuator is switched off, the LED
lights up with the configured day/night
brightnesses. The LED lights up with
100% when the actuator is switched on.
■
Off:
The LED is switched off permanent.
Notice:
Depending on the selected sensor function,
it can be that individual LED operating
modes are not available.
