19
FUNCTIONS AND
ADJUSTMENTS
RADIO
CD PLAYER
CD MP3
PLAYER
QUICK
GUIDE
INTRODUCTION
AUX
AUX OFFSET function
(alignment of the portable device
volume to the one of the other
sources)
This function enables to align the volume
of the Aux source, depending on its own
portable player, to the one of the other
sources. To activate the function, press
the MENU button and then select “AUX
offset”.
Press the buttons
¯
or
˙
to decrease or
increase the volume value (set from – 6 to
+ 6).
RADIO OFF function
(on and off mode)
This function makes it possible to set the
radio switching off mode by choosing be-
tween two methods. To activate the func-
tion use the buttons
¯
or
˙
.
The choose mode appears on the display:
❒
“Radio off: 00 min”: the radio turns off
in connection with the ignition key; the
radio is turned automatically off as soon
as the key is turned to the STOP posi-
tion;
❒
“Radio off: 20 min”: the radio turns off
independently from the ignition key; the
radio remains on for a maximum peri-
od of 20 minutes after the key has been
turned to the STOP position.
SYSTEM RESET function
This function is used to restore all settings
to the factory values. The options are:
❒
NO: no restore intervention;
❒
YES: the default parameters will be re-
stored. During such operation, the
wording “Resetting” appears on the dis-
play. At the end of the operation, the
source does not change and the previ-
ous situation will be displayed.
PHONE PRESETTING
When a phone call is received, the radio
audio will be connected to the telephone
output if the hands-free kit is installed on
the car. The sound of the telephone al-
ways arrives at a fixed volume, but it is
possible to adjust it during a phone con-
versation by pressing the rotating ring nut
fig. 1
.
The fixed volume of the telephone audio
can be adjusted with the function
“SPEECH VOLUME” of the Menu. The
wording “PHONE” appears on the display
during the telephone audio deactivation.
603_95_045 ABARTH 500 RADIO SB08+AUX GB 9-07-2010 11:32 Pagina 19
