FUNCTIONS AND
ADJUSTMENTS
RADIO
CD PLAYER
CD MP3
PLAYER
AUX
24
QUICK
GUIDE
INTRODUCTION
CD PLAYER SELECTION
To activate the CD player built into the
equipment, proceed as follows:
❒
load a CD with the equipment switched
on: the first track will start to play;
or
❒
if a CD has already been loaded, turn
on the car radio and then press briefly
the button CD to select the “CD” func-
tion mode: the last track listened to will
start to play.
It is advisable to use original CDs to en-
sure optimal playing. If CD-R/RWs are
used, we recommend using good quality
media that are burned at the slowest
speed possible.
INTRODUCTION
This chapter describes the variants re-
garding the operation of the CD player
only: as far as the operation of the radio
is concerned, refer to the description in
the “Functions and Adjustments” chapter.
CD LOADING/EJECTION
To load the CD, insert it gently into the
slot to activate the motorised loading sys-
tem, which will position it correctly.
The CD can be loaded with radio off and
the ignition key turned to MAR: in this
case the radio will remain off. When the
radio is turned on, the last source listened
to before being switched off, will be acti-
vated.
When a CD is inserted the display will
show the symbol “CD-IN” and the word-
ing “CD Reading”. They will remain dis-
played for the whole time required for the
radio to read the CD. When this time has
elapsed the radio automatically starts play-
ing the first track.
C
C
D
D
P
P
L
L
A
A
Y
Y
E
E
R
R
603_95_045 ABARTH 500 RADIO SB08+AUX GB 9-07-2010 11:32 Pagina 24