FUNCTIONS AND
ADJUSTMENTS
RADIO
CD PLAYER
CD MP3
PLAYER
AUX
14
QUICK
GUIDE
INTRODUCTION
PRESET/USER*/CLASSIC/
ROCK/JAZZ functions
(equaliser activation/deactivation)
The built-in equaliser can be activat-
ed/deactivated. When the equaliser func-
tion is off, the audio settings can only be
changed by adjusting the “Bass” and “Tre-
ble” settings, whereas when the function
is on, the acoustic curves can be adjust-
ed. To deactivate the equaliser, select the
“EQ Preset” function using the buttons
¯
or
˙
.
To activate the equaliser, use the buttons
¯
or
˙
to select one of the adjustments:
❒
“FM/AM/CD...EQ User” (adjustment of
7 equaliser bands that can be changed
by the user);
❒
“Classic” (equaliser preset for optimal
classic music sound);
❒
“Rock” (equaliser preset for optimal
rock and pop music sound);
❒
“Jazz” (equaliser preset for optimal jazz
music sound).
When one of the equaliser adjustments
is activated the wording “EQ” lights up.
*USER EQ SETTINGS function
(equaliser settings only if the USER
setting has been selected)
To set a personalised equaliser adjust-
ment, place button
▲
or
▼
at USER and
press the button MENU.
On the display appears a 7 bar graph, in
which each bar represents a frequency. Se-
lect the bar to be adjusted using the but-
tons
¯
or
˙
; the selected bar will start
to flash and it can be adjusted using but-
tons
▲
or
▼
.
To store the setting, press the button
AUDIO again. The display will show the
source activated at that time followed by
the wording “User”. If the mode is “FM”
the display will show the wording “FM EQ
User”.
FADER ADJUSTMENT
Proceed as follows:
❒
Use the button
▲
or
▼
to set “Fader”
in the AUDIO menu;
❒
press the button
˙
to increase the
sound coming from the rear speakers
or the button
¯
to increase the sound
coming from the front speakers.
By pressing the buttons briefly, the levels
will change progressively. By pressing
them down longer, the levels will change
quickly.
Select the value “
¯
0
˙
” to set the right
and left audio outputs at the same level.
LOUDNESS FUNCTION
The Loudness function improves the vol-
ume of the sound whilst listening at low
volumes, increasing the bass and treble.
To activate/deactivate this function, use
the button
¯
or
˙
to select the “Loud-
ness” setting in the AUDIO menu. The
condition of the function (on or off) is
shown on the display for a few seconds
by the wording “Loudness On” or “Loud-
ness Off”.
603_95_045 ABARTH 500 RADIO SB08+AUX GB 9-07-2010 11:32 Pagina 14
