21
FUNCTIONS AND
ADJUSTMENTS
RADIO
CD PLAYER
CD MP3
PLAYER
QUICK
GUIDE
INTRODUCTION
AUX
FREQUENCY BAND SELECTION
With the Radio mode active, press the
button FM
AS
or AM briefly and repeated-
ly to select the desired reception band.
Each time the button is pressed the fol-
lowing bands are selected cyclically:
❒
By pressing the button FM
AS
: “FM1”,
“FM2” or “FMA”;
❒
By pressing the button AM: “MW1,
MW2”.
Each band is highlighted by the corre-
sponding wordings on the display. The last
station selected on the respective fre-
quency band will be tuned into.
The FM band is divided into sections: FM1,
FM2 or “FMA”; the FMA reception band
is reserved to broadcasters stored auto-
matically using the Autostore function.
PRESET BUTTONS
The buttons numbered from 1 to 6 are
used to set the following preselections:
❒
18 in the FM band (6 in FM1, 6 in FM2,
6 in FMT or “FMA” (on some versions));
❒
12 in the MW band (6 in MW1, 6 in
MW2).
To listen to a preset station, select the de-
sired frequency band and then press briefly
the corresponding preset button (from
1 to 6).
By pressing the preset button for more
than 2 seconds, the tuned station will be
stored. The storing phase is confirmed by
an acoustic signal.
INTRODUCTION
When the car radio is turned on, the last
function that was selected before turning
it off (Radio, CD,CD MP3, AUX) is acti-
vated.
To select the Radio function when an-
other audio source is being listened to,
briefly press the buttons FM
AS
or AM de-
pending on the desired band.
Once the Radio mode has been activated,
the display will show the name (RDS sta-
tions only) or the frequency of the se-
lected radio station, the frequency band
selected (e.g. FM1) and the preselect but-
ton number (e.g. P1).
R
R
A
A
D
D
I
I
O
O
(
(
T
T
u
u
n
n
e
e
r
r
)
)
603_95_045 ABARTH 500 RADIO SB08+AUX GB 9-07-2010 11:32 Pagina 21