6
ControlLogix Voltage/Current Output Module
Publication 1756-5.42 - September 1999
Key the Removable Terminal Block/Interface Module
Key the RTB or IFM to prevent inadvertantly making the wrong wire connections to
your module. Use a unique keying pattern for each module. You can use a
minimum of one key.
Key the module. Insert the U-shaped band with the longer side near the
terminals. Push the band onto the module until it snaps into place.
Key the RTB in positions that correspond to unkeyed module positions.
Insert the wedge-shaped tab on the RTB with the rounded edge first. Push
the tab onto the RTB until it stops.
Reposition the tabs to rekey future module applications.
20850–M
U-shaped
Keying Band
20851–M
1 2
0
3
4 5
6 7
Wedge-shaped
Keying Tab
Begin keying in
section #6 or #7.
Module side of RTB
Содержание 1756-ENBT ControlLogix
Страница 38: ...18 ControlLogix DC 10 31 2V Input Module Publication 1756 IN031D EN P February 2003 Notes ...
Страница 39: ...ControlLogix DC 10 31 2V Input Module 19 Publication 1756 IN031D EN P February 2003 Notes ...
Страница 63: ...ControlLogix Voltage Current Input Module 23 Publication 1756 IN039D EN P February 2003 Notes ...
Страница 151: ...ControlLogix Voltage Current Output Module 19 Publication 1756 5 42 September 1999 ...
