Aastra Venture IP 480i, Системное руководство

Страница: 4 / 24

2 Model Venture IP 480i System Guide
Systems Options Menu
Network Guidelines
• Multicast IP traffic must be permitted on the network (default multicast
address is 239.192.228.123)
• Ensure CAT5 or better cabling is installed to get best performance
• Place all sets & gateways in the same subnet
• Do not place servers or printers behind the dual port phone.
Provide a dedicated port on the switch for these devices
• Do not leave an un-powered device connected to the network
If a DHCP (Dynamic Host Configuration Protocol) server is available on
the network, the Venture IP telephone sets and Gateways will obtain
their IP Addresses and Netmask through communication with the server.
On networks without a DHCP server, the sets and the Gateways will
automatically obtain a unique address in the Zeroconf range (169.254/16),
and set their Netmask to 255.255.255.0.
The system administrator may choose to apply fixed IP addresses and
Netmasks using the Network Options settings. Once applied, these settings
will be persisted in the set unless (a) changed manually or (b) another
device is detected at boot time using the same IP address.
To enable a set with manually configured IP settings to resume automatic
operation (DHCP/Zeroconf), reset its IP Address to 0.0.0.0.
Systems Options Menu
The System Options menu lets you set the System Options from any
telephone set. The available functions are:
•
Change Password
– lets you change the administrator’s password;
•
Set Management
– lets you manage all the sets in your network
including:
•
Set Extension
– lets you change the extension number of a set
•
Paging Zone Setup
– lets you setup various paging zones
•
Upgrade
– lets you upgrade the software load in the telephone sets
•
Fresh Start
– lets you return a telephone set to factory settings
•
Reset Password
– lets you reset a user’s password
•
Remove Extension
–remove data for a set or gateway from the
network, for example in the event that the device is broken.
•
Groups
– lets you create groups for simultaneous ringing, to apply
dialing restrictions to, or to set up direct inward dialing
•
Date and Time
– lets you set system date and time
•
Network Options
– lets you change the IP address of a telephone set
•
Gateways
– lets you manage:
•
Auto Attendant
– lets you customize the Auto Attendant
•
Lines
– lets you set up direct inward dialing and authorize access
for outgoing calls
•
Audio-on-Hold
– lets you configure music-on-hold in your system
•
Dialing Rules
– lets you apply dialing restrictions for outgoing calls
All manuals and user guides at all-guides.com