Model Venture IP 480i System Guide
1
Introduction
Introduction
This guide provides instructions for administering all VentureIP
480i telephones operating on the same network.
While administering the VentureIP telephone system does not require the
technical expertise of a traditional “system administrator” or IT professional,
it is recommended that one person controls the advanced feature settings
contained in this guide.
Installation and Configuration
A typical Venture IP system configuration is as follows:
A typical configuration consists of a standard IP Router or Switch (not
included), Cat5 cabling to each phone, and a Venture IP Gateway for access
to standard analog phone lines provided by a Public Network Service
Provider. No Central Server is required. All the features are in the Phone.
System hookup is easy with the Venture IP System. Simply plug each phone
and the Venture IP Gateway into an unused port of a Fast Ethernet 100Mbps
Router or Switch, connect the Venture IP Gateway (provided separately) to
the analog phone lines provided by your service provider, apply power, and
the system auto configures itself. Note that the example above assumes a
Router or Switch equipped with POE (Power Over Ethernet) to supply
power to the Venture IP Gateway and phones. Mid-span POE injectors are
also an option and can be ordered separately from Aastra.
PSTN
48
0
48
0
480
480
PSTN
VentureIP Gatway
480
480
480
480
All manuals and user guides at all-guides.com
