Model Venture IP 480i System Guide
9
Set Management
Remove Extension
Remove Extension allows the administrator to remove all information
about a set or gateway from the network. For example, this operation would
be done to remove all references to a broken device prior to replacing it.
To remove information about a set or gateway by extension number:
1.
In
System Options
, navigate to
Set Management
and press
Select
.
2.
Navigate to
Remove Extension
and press
Select
.
3.
Enter the extension number to be removed, and press
Next
.
Note:
The extension number of a Gateway may be found through the Gateway
option under the System Options menu.
4.
Review the information presented on the confirmation screen, and press
Yes
to complete the operation.
To remove information about a set using the Corporate Directory:
1.
In
System Options
, navigate to
Set Management
and press
Select
.
2.
Navigate to
Remove Extension
and press
Select
.
3.
Press the
FromDir
key to open the Corporate Directory.
4.
Navigate to the set to be removed, and press
Select
.
Note:
Gateways do not appear in the Corporate Directory.
5.
Review the information presented on the confirmation screen, and press
Yes
to complete the operation.
Caution:
Prior to performing this procedure, please ensure that all other
sets and gateways are active and connected to the network (with the
exception of the set or gateway that is being removed). Subsequent to this
operation, other sets and gateways getting connected to the network
must be in factory setting, i.e. the sets or gateways must either be brand
new, or Fresh Started as described on page 6.
All manuals and user guides at all-guides.com
all-guides.com
