Aastra TA710i, Руководство по установке оборудования

Страница: 9 / 43

TA7014i Hardware Installation
© 2014 Aastra Sweden | 154_1531 ANF 901| A | 2014-05-15 8
2.2
Product Serial number Location
The serial number label for the TA7104i device is located on the bottom of the unit.
2.3
Front Connectors and Indicators
See “Indicators (LEDs)” for a description of the LED patterns the TA7104i may have and the
states they represent.
Figure 1 shows the five visual indicators located on the front of the TA7104i .
Figure 1: TA7104i Front Panel Indicators
Table 2 describes the connectors on the front panel of the TA7104i.
Table 2: TA7104i Front LEDs
LED Descriptio
n
1.
Ready When lit, the TA7104i is ready to initiate or receive a call. The unit
does not have to be registered to a server.
2. In-Use When lit, at least one of the FXS/FXO lines is in use.
3. ETH2 Provides the state of the network connected to the ETH2 connector.
4.
ETH1 Provides the state of the network connected to the ETH1 connector.
5. Power When lit, power is applied to the TA7104i .
Rear Connectors
The TA7104i has several connections that must be properly set. Figure 2 shows the rear panel
of the TA7104i.