TA7104i Hardware Installation
© 2014 Aastra Sweden | 154_1531 ANF 901| A | 2014-04-15
17
3.6
Hardware Installation
This section describes how to set the connectors of the TA7104i.
Warning:
Do not connect the TA7104i directly to Telecommunication Systems.
Caution:
The TA7104i must be installed on a circuit equipped with a breaker so that you can
easily power the unit off if required.
See
Appendix B - Cabling Considerations
, for more details on the cables the TA7104i uses.
Connecting Cables
The following describes how to connect the various cables to the TA7104i.
Figure 5:
TA7104i Hardware Installation
1. Before you begin, be sure that the TA7104i is powered off.
2. Connect analog telephones or fax machines into the Pohne-Fax 1 and Phone-Fax 2
connectors. Use a standard telecommunication cord with a minimum of 26 AWG wire size.
Note:
The TA7104i telephone line interface has been designed to interface with a conventional
telephone or fax machine. Connections to FXS ports of third party devices such as a PBX / Key
System could damage the TA7104i.
Connect a 10/100 BaseT Ethernet RJ-45 cable into the
WAN
connector of the TA7104i; connect
the other end to a compatible Ethernet interface that supplies TCP/IP network access (e.g.,
router, switch, hub or computer). Use a standard telecommunication cord with a minimum of 26
AWG wire size. You can either use a crossover or straight Ethernet cable because it performs
automatic MDI / MDIX detection. See “RJ-45 Cable” for more details.
Connect a 10/100 BaseT Ethernet RJ-45 cable into the
LAN
connector of the TA7104i and
connect the other end to the network card of a computer. Use a standard telecommunication
cord with a minimum of 26 AWG wire size. You can either use a crossover or straight Ethernet
cable because it performs automatic MDI / MDIX detection. See
RJ-45 Cable
for more details.
Connect the power cord to the TA7104i. Do not yet connect the other end of the power cord to
an electrical outlet. You are now ready to start the TA7104i.
Содержание TA710i
Страница 1: ...TA7104i Hardware Installation Guide...
