Aastra TA710i, Руководство по установке оборудования

Страница: 24 / 43

TA7104i Hardware Installation
© 2014 Aastra Sweden | 154_1531 ANF 901| A | 2014-05-15 23
UpdateFailed Triggered after a failure of a firmware
pack download operation. After 4
seconds, the unit restarts. All LEDs:
•
blinking at 3Hz,
50% duty. One LED out
of two has a 180 degree
phase. This pattern lasts
for 8 seconds.
Rescue Network
Enabled Triggered after the user has
performed a partial reset procedure. Power and In Use LEDs:
• blinking
(synchronized)
1Hz, 75% duty
BootOnRecoveryBank Triggered when the unit is booting on
the recovery bank and no update is
pending. Power LED:
•
blinking, 0.25Hz,
75% duty
Automatic network
configuration in progress Waiting for DHCP (IPv4 or IPv6)
answer or IPv6 router advertisement
or PPPoE connection. All LEDs:
•
Blinking green,
3Hz, 50% duty
No network address set Triggered when the unit cannot be
contacted because DHCP failed, PPP
failed, and no static interface is
configured. Power LED:
•
blinking, 3 Hz, 50%
duty.
NetworkRescue The unit tries to download and install
a firmware given by the Network
Rescue server. Ready LED:
• Off
All other LEDs:
•
blinking to show a
LED displacing light from
left to right and right to
left.