48
Aastra MBU 400 Administrator Guide
Using Configuration Files
The following configuration parameters are used for scheduled firmware updates.
Firmware update error codes
A number of errors can occur when initiating a firmware update or while firmware
update is in progress.
Parameter
Possible values
Description
FWU_POLLING_ENABLE
0,1 [DISABLE,
ENABLE]
Enables or disables scheduled of
firmware update.
FWU_POLLING_MODE
0,1 [ABS, REL]
0 (ABS) means that firmware
update uses the absolute time, 1
(REL) means that firmware update
uses a relative time.
FWU_POLLING_PERIOD
Unit is in sec
Used in REL mode. Number of
seconds after boot that the MBU
400 gateway will search for new
software.
FWU_POLLING_TIME_HH
0-23 [Hour]
Used in ABS mode. Hour for
searching for new software.
FWU_POLLING_TIME_MM 0-59 [Min]
Used in ABS mode. Minute for
searching for new software.
Error Code
Description
Code 0: No problems
Indicates everything is working as specified.
Code 1: Wrong parameter
Indicates the firmware update application cannot access
the selected software version (The selected software is
not present in the dir list).
Code 2: Network not available
Indicates the phone is experiencing some network
problem.
This can be due to an unplugged Ethernet cable,or a
HTTP/1.1 response code presented to the user as a
network error.
Code 3: VOIP_FWU_STATUS_UNKNOWN
Indicates the firmware file is not found on the firmware
update server (HTTP/1.1 404).
Code 4: Firmware files too big
Indicates the firmware update file is too big
Code 5: Timeout waiting for file
Indicates the server is busy and cannot process the get
request within a reasonable time.
Code 6: Server not specified
Indicates the firmware update server is not specified.
Code 7: VOIP_FWU_STATUS_UNSPECIFIED_ERROR Indicates one of several miscellaneous errors such as
wrong format for the downloaded firmware update file.
Code 8: Illegal use of the Firmware updates API
Indicates an abuse of the firmware update API.
Code 9 Syntax error found in the DirFile
Indicates a syntax error in the DirFile.
(The DirFile contains all information needed for a
firmware update including code size, link date, languages
and so on. )
Code 10: Unknown format of DirFile
Indicates the downloaded DirFile is of an unknown
format.
This could indicate that the MBU 400 is downloading
firmware from the wrong folder on the firmware update
server.
Содержание MBU 400
