Aastra MBU 400, Руководство администратора, Страница: 23 / 74

Aastra MBU 400 Administrator Guide 23
Getting Started
2. Click to return all settings to the default values.
All settings on this page are reset to default values. The MBU 400 then saves the
settings and resets automatically.
Note: All account settings will be lost and need to be re-entered before VoIP calls
can be made. The handset access codes will not be reset, and need to be changed to
match the default gateway access code of "
0000 ".
Factory Defaulting from the Base Unit
• Factory default the MBU by holding the
RESET
switch for about 15 seconds (until
all the LEDs comes on) then releasing the switch.
After factory defaulting the MBU, handsets may need to be re-registered. See the
Aastra MBU 400 User Guide for further handset registration information.
Factory Default Access Codes
A factory default reset will change the access code on the gateway to " 0000 " but the
handset access codes will not change. You must manually reset the handset activation
code on each handset to "
0000 " using
Settings
>
System Settings
>
Access
Code
>
Handset.
See the Aastra MBU 400 User Guide for further handset information.
Factory Default Web Username and Password
A factory default reset will change the WEB UI username and password back to the
original settings of "
admin " and " 22222 ", unless changed by a subsequent
configuration file transfer.