Aastra 6869i Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 86

Aastra 6869i Скачать руководство пользователя страница 36

Phoning

36

Aastra 6867i / Aastra 6869i

eud-1630/1.1 – R3.2 – 10.2014

Take (pick up own call)

You want to transfer a call from one phone to another without interrupting the con-
nection (for example, from a desk phone to a cordless phone).

The take function can be used to transfer calls between your phones.
Requirement: They are within the one number user concept (see chapter

"Purpose

and function"

, page

76

).

This function must be stored under a function key (see chapter

"Configuring keys"

,

page

72

).

Starting announcement

You want to speak directly to an internal user or an announcement group via the
loudspeaker - where available - without expecting an answer (similar to an intercom).
The recipient is alerted to the announcement by two short signal tones. You are
immediately unilaterally connected via the loudspeaker.

Aastra 6869i:

Call transfer

Call transfer with prior notice (you are in an active call):

1. Press the

Call transfer

softkey.

2. Enter the call number of the second call partner and press the

Dial

softkey.

➔

The second call party is called; first call partner is put on hold.

3. Wait until the person has answered the call.

➔

If the other user does not answer, you can cancel the second call with the

Cancel

softkey or with the End key and take back the first call.

4. Announce the call party.
5. Put the handset on-hook.

➔

Your first call partner and the other person are now connected with each
other.

Call transfer

Call transfer without prior notice (you are in an active call):

1. Press the

Call transfer

softkey.

2. Enter the call number of the second call partner and press the

Dial

softkey.

➔

The second call party is called; first call partner is put on hold.

3. Wait for the first ring tone.
4. Put the handset on-hook.

➔

The other party is then called directly by your first call partner.

➔

Recall: If the other party does not answer, the call comes back to your phone.

Take

Picking up your own call (you are in an active call):

Press the function key for

Take

.

➔

After a brief moment, you are connected with the caller on another phone.

«
...
34
35
36
37
38
...
»

Содержание 6869i























































































Отзывы:

Нет отзывов