Additional Information
33
RN-001037-03 REV19 – 07.2014
Parameter
–
softkeyN ring splash
prgkeyN ring splash
topsoftkeyN ring splash
expmodX keyN ring splash
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description
When a key is configured for BLF functionality, this parameter controls
the ring splash alert pattern per key. The following alerting patterns
are available:
•
0
: Silence (ring splash off ).
•
1
: Normal (same as current BLF ring splash).
•
2
: Normal delayed (After a delay of [x] seconds, the ring signal that
is the same as the current BLF ring splash is played [use the “ring
splash delay” parameter to define the delay]).
•
3
: Periodic (similar to the normal ring signal that is used by the
phone itself. The actual ring melody is based on the current mel-
ody set for the line to which the BLF key is associated [use the
“ring splash frequency” parameter to define the frequency inter-
val).
•
4
: Periodic delayed (same as Periodic but after a delay of [x] sec-
onds, the ring signal that is used by the phone is played [use the
“ring splash frequency” parameter to define the frequency inter-
val and the “ring splash delay” parameter to define the delay]).
•
5
: Low volume (same as the current BLF ring splash but at a lower
level to be less intrusive).
•
6
: Low volume delayed (after a delay of [x] seconds, the ring signal
that is the same as the current BLF ring splash is played at a lower
level [use the “ring splash delay” parameter to define the delay]).
•
7
: The behavior is determined by the global parameter “play a ring
splash”.
–
If “play a ring splash” is defined as 0 then the feature is disabled.
–
If “play a ring splash” is defined as 1 then the behavior is the
same as Normal.
–
If “play a ring splash” is defined as 2 then the behavior is the
same as Normal but the ring splash plays when idle and also
during the active call state.
•
8
: In call delayed (same as Normal delayed but ring splash plays
when idle and also during the active call state [use the “ring
splash delay” parameter to define the delay]).
•
9
: In call periodic (same as Periodic but ring splash plays when idle
and also during the active call state [use the “ring splash fre-
quency” parameter to define the frequency interval).
•
10
: In call periodic delayed (same as Periodic delayed but ring
splash plays when idle and also during the active call state [use
the “ring splash frequency” parameter to define the frequency
interval and the “ring splash delay” parameter to define the
delay]).
•
11
: In call low volume (same as Low volume but ring splash plays
when idle and also during the active call state).
