manualshive.com logo in svg

Aastra 470, Системное руководство, Страница: 62 / 250

Поделиться
Скачать
Aastra 470 Скачать руководство пользователя страница 62

Expansion Stages and System Capacity

62

Aastra 470 as of R1.2

syd-0337/1.2 – R1.2 – 11.2011

•

Standard SIP Terminals

One licence is required per terminal to operate standard SIP terminals. The li-
cences are needed when registering the terminals on the system and can be 
used even if 

Aastra SIP Terminals

 icences are missing.

•

Video Terminals

In addition to the 

Standard SIP Terminals

 licence you need to purchase also an 

Video Terminals

 licence in order to use the video functionality of an standard SIP 

video terminal. Use is also possible if 

Aastra Video Terminals

 licences are missing.

•

SIP Access Channels

The connection of the system to a SIP service provider or the networking of the 
systems via SIP requires one licence per channel.

Aastra Intelligent Net

In an AIN all the SIP licences are always acquired for the Master. The 
number of licences determines the maximum number of simultane-
ously active voice channels, regardless of the nodes on which they are 
currently being used. Requirement: The DSP resources on each node 
must be available and allocated accordingly.

•

VoIP Channels for Standard Media Switch

This licence enables the conversion of voice channels for VoIP - non VoIP con-
nections and is used for IP terminals, SIP terminals, SIP access channels or to op-
erate an Aastra Intelligent Net. High voice data compression is possible with the 
standard VoIP channels (G.729). One voice channel is activated with each li-
cence.

Note:

Theoretically there are no VoIP channel licences in a pure VoIP environ-
ment (only IP/SIP phones on the system and connection to the public 
network via an SIP provider). However, as soon as voice mail functions, 
the announcement service or music on hold is used, VoIP channel 
licences are required as the use of these functions entails a conversion 
of the voice data.

Aastra Intelligent Net

In an AIN the licence can also be used for the connections between the 
nodes. Two VoIP channel licences are required for each node connec-
tion. The licences are always acquired for the Master. The number of 
licences determines the maximum number of simultaneously active 
conversions, regardless of the nodes on which they are currently being 
used. Requirement: The DSP resources on each node must be available 
and allocated accordingly.

Содержание 470



























































































































































































































































Отзывы:

Нет отзывов