Operation and Maintenance
204
Aastra 470 as of R1.2
syd-0337/1.2 – R1.2 – 11.2011
Overheat
The temperature inside the housing is too high.
Appropriate measures must then be taken
immediately to improve heat dissipation, e. g.
by mounting the required dummy covers or
lowering the ambient temperature. Measures
are automatically adopted, depending on
where the overheating occurs:
Overheating on the FXO card: The ports of the
corresponding card are shut down, group by
group.
Date, time
Overload detected at USB
port (CPU2)
A (current) overload was detected at one of the
USB interfaces on the applications card (CPU2).
Note: The maximum current input at the USB
interfaces varies (see
).
Date, time
Port out of service
A port previously in operation has stopped
functioning.
Number of the slot, relevant
port number, date, time
QSIG licence limit reached
Maximum number of licensed outgoing con-
nections with QSIG protocol exceeded
Route number, user number,
date, time
Recording error
• Card not fitted
• Card not logged on
• Card defective
Card number, date, time
Remote maintenance is acti-
vated
Remote maintenance has been activated
Unfiltered output to local desti-
nations
Reset card
A reset was carried out for one card
Number of the expansion slot,
date, time
Satellites missing after super-
vision time
After an AIN update (Master and all satellites)
some satellites no longer have a connection to
the Master.
Total satellites missing, Satel-
lites rolled back, Date, Time
Send e-mail failed
The system was unable to send an e-mail
because an error occurred.
Cause/action, e-mail client,
additional parameter, date,
time
SIP account available
The SIP account is unable to register with the
SIP provider for a specific reason (0: Provider
cannot be reached / 1: No authorization). The
event is triggered only if the parameter
Regis-
tration required
is configured to
Yes
.
Provider, account, date, time
SIP account available
The SIP account has successfully registered
with the SIP provider.
Provider, account, date, time
Software upgrade IP system
phone failed
The software update of an Aastra 5360ip/
5361ip/5370ip/5380ip has failed for the stated
reason.
User number, terminal ID, rea-
son, date, time
Software upgrade IP system
phone successful
The software update of an Aastra 5360ip/
5361ip/5370ip/5380ip has now been success-
fully completed after unsuccessful attempt(s).
User number, terminal ID, date,
time
Event/ error message
Trigger condition
Details