Configuration
157
Aastra 470 as of R1.2
syd-0337/1.2 – R1.2 – 11.2011
The default password for the communication server and AMS is identical.
Note:
It is not possible to configure the communication server with a default
password. During the initial commissioning or after initialization you are
prompted to change the default password during the connection set-up
with the communication server. This ensures that unauthorized person-
nel cannot manipulate the communication server data from a remote
location once access for remote maintenance has been enabled.
See also:
The control panel on the front panel is PIN-protected (see
).
5. 3. 2. 2
Password syntax
The following rules apply to password selection and spelling:
• A password must consist of a minimum of 8 and a maximum of 10 alphanumeri-
cal characters.
• Unlike the user names, the passwords are case sensitive.
• The following special characters can be used: ?, /, <, >, -, +, *, #, =,. and space.
• German umlauts (e. g. ä, ö, ü) and other diacritical characters (e.g. é, à, â) are not
permitted.
• The standard passwords 1ascotel, 2ascotel, 3ascotel and 4ascotel are not permit-
ted.
• The password must not be the same as the user name.
5. 3. 2. 3
Change password
Any user who has been assigned an authorisation profile in which the
User Access
Control
administration right is configured to
Yes
is authorised to modify the pass-
words of all user accounts. It is therefore advisable to assign this administration
right restrictively.
Users whose password has been changed are prompted to enter their newly as-
signed password the next time they log in. The same applies to users whose ac-
counts have been newly created.
Users without the administration right
User access control
can only change their
own password.