AAQ SXJS4019A Скачать руководство пользователя страница 42

Страница: 42 / 74

Chapter 2 Safety Instructions

2.1 Safety rules

Please read and fully understand the entire contents of this manual prior

to operation, such as instructions and rules. Negligence may cause

severe accidents, electric shock or serious physical injury and property

damage.

a. Know your machine

For personal safety, please read the manual carefully. Be familiar with the application and restriction of

the machine as well as the potential hazard related to the machine.

b. Keep work area clean

The disordered area and load-bearing components may cause accidents.

c. Do not use it in dangerous environment

Do not use the machine in wet or rainy place or expose it in the rain. Keep the work area with good

lighting condition.

d. Keep non-trained personnel away.

All visitors should keep safe distance in the work area.

e. Do not operate the machine by force

Operate the machine to work at designed speed safely.

f. Dress properly

Please don’t wear loose-fitting clothes, gloves, necklace, bracelet or jewelry which may be caught by

moving part of the machine. Please wear non-slip shoes and a cap to cover long hair.

g. Do not maintain the machine under working situation.

The machine should be maintained periodically, such as lubrication, adjustment.

h. Before maintenance and replacing spare parts, cut off the power of the machine
i. Don’t operate the machine without supervision.

Содержание SXJS4019A











































































Результаты поиска

Содержание SXJS4019A

Отзывы:

Бренды по названию

Популярные бренды

AAQ SXJS4019A, Руководство по установке и инструкции по эксплуатации

Результаты поиска

Содержание SXJS4019A

Отзывы:

Бренды по названию

Популярные бренды