AAQ SXJS4019A, Руководство по установке и инструкции по эксплуатации

Страница: 12 / 74

11
Lift the main platform to points A and C, adjust the four holes on the head and tail of
the platform to precisely align with the four screw holes on the beam, and fine-adjust
if necessary; now screw the bolts into the screw holes, taking care not to tighten; Note
that the head of the platform is an M16 * 45 hexagonal bolt with a flat spring washer,
and the tail is an M16 * 45 hexagonal screw with a flat spring washer.
Bolts on the Head Bolts on the tail
When placing the main platform, be careful not to squeeze the steel rope, and at the
same time thread the steeel rope into the channel steel of the beam according to the
following diagram.
Steel Rope Connection diagram-driving head position