8
/
13
SAFTY INSTRUCTIONS AND WARNINGS:
1
:
DO NOT exceed the rated capacity
:
1360Kg
.
2:
DO NOT stand under the work place when the
hoist
is working.
3:
This
hoist
is mainly for lifting
.
Operator only can work with the
support of jack stand. Also make sure the surround situation is
safe.
4:
After lifting, operator only can start work by locking the
carriage with safety lock-bar.
OPERATING INSTRUCTIONS
1.
Ensure that the vehicle’s rigidity is adequate for lifting.
2.
Move the
hoist
with the handlebar.
3.
Put the wheel fork under desired position, i.e. at the front or rear wheel of
the vehicle you want to lift.(Fig.7)
4.
Connect the compressed air hose to air-hydraulic foot pump.
Fig. 7
Fig.8
5. Before lifting the vehicle, make sure the engine is turned off.
Check for
clearance around vehicle. Loosen the handbrake and put the
transmission in neutral.
6. Press down the foot lever to lift up the wheel to desired height of the vehicle
is reached (Fig. 8)
7. Lock the carriage by putting the safety bar into the column then release the
lever.(Fig. 8)
8. To lower down the vehicle, first press down the foot lever again to lift up the
carriage a little. Take out the safety bar. Then release the lever. The vehicle
will lower down by its gravity.
9. In case you want to lift the vehicle by the body frame instead of by a wheel,
Содержание AutoLift AL-182093
Страница 4: ...7 13 Fig 3 Fig 5 Fig 4 Fig 6 Now the hoist is ready for use ...
Страница 7: ...10 13 PARTS DRAWING ...
Страница 8: ...11 13 ...
