AAQ AutoLift AL-182093, Руководство по установке и инструкции по эксплуатации

Страница: 3 / 14

6 / 13
TECHNICAL DESCRIPTION
The
hoist
consists of:
1 .
The Column
- The basic part of the system consists of a specially
shaped column of folded metal sheet into which the lifting carriage
and cylinder are placed.
2 .
The Base
- The base is D-shaped with fixed wheels at two of its ends
and another two swivel ones at the opposite ends. This ensures
stability and mobility.
2 .
Lifting Carriage
- The carriage consists of a U-shaped structure, with
two axles containing each a wheel with dry bushings, which carry
the weight to
hoist
, a cover with a hole for the spindle, and a vertical
hook at the front for holding the different attachments.
3 .
Air-hydraulic foot pump
– Behind the column, there is the
air-hydraulic foot pump. It supply the power to the cylinder for
lifting up the weight. It is controlled by the operator’s foot with
great convenience.
Fig. 2
INSTALLATION
STEP 1 Casters
Bolt the swivel casters on the rear of the basement. (Fig 3).
STEP 2 Column
Bolt the handle on the column then bolt the column on the basement (Fig.4).
STEP 3 Pump and hose
Put on the air-hydraulic foot pump. Connect the hose from pump to cylinder
(Fig. 5).
STEP 4 Wheel fork
Put on the wheel fork (Fig. 6) and the carriage lock bar.