AAQ AL-6214A, Инструкция по установке, эксплуатации и ремонту

Страница: 5 / 32

4
5
7mm
200 mm
150mm
125mm
200 x 200 mm
F72 Mesh
OVERVIEW OF THE HOIST
Installation, Operation and Parts Manual
AutoLift AL-6214
2.1 General descriptions
This two- post hoist is composed of posts, carriages, lifting arms, cylinders and motor unit, etc.
The hoist is driven by an electro-hydraulic system. The gear pump delivers hydraulic oil to oil cylinders and pushes upwards
its piston. The piston drives the chain to raise the carriage and the lifting arms. During the lifting process, the safety paws will
automatically and firmly lock on the safety ladder. Therefore, no dropping will happen in case of hydraulic system failure.
Safety structure:
2.2 Technical data
Model Lifting capacity Lifting time Lifting height Height Width Width between posts
AL6214 3800kg 50 Sec 1930mm 3700mm 3436mm 2850mm
FOUNDATION DIMENSIONS
IN MM
QUALITY OF
CONCRETE
MIN.
PRESSURE
RESISTANCE
OF SURFACE
MAX.
REACTION ON
EACH
BEARING
POINT
Length Width Thickness
25-30
Mpa
425
Kg/cm
2
0.9
Kg/cm 2
5000 4000 150
25-30MPA REINFORCED CONCRETE
F72 REINFORCED MESH
COMPACTED SOIL
GRAVEL SHEETING
Locking Leaver
Lock Cover
Arm Lock