Zone
Zone
MAIN SCREEN
Pioneer Gold 1.10 & 2.05 Touch Screen Operator Interface
2-8
USB FUNCTIONS
SECURITY
Changing Passcodes
Password Clearance Levels
Below is a list of the passcode levels, default codes, and actions that
can be performed at the various levels.
Level 0—No Passcode Needed, System
Secured
Level 0 users can view alarms and input and output
status points. No changes to schedules or other settings
can be made.
Manager Level—Default: 1988
Manager Level users can view alarms and input and
output status points. They can change Setpoint values.
They can also change the system date and time, but no
changes to any controller configurations can be made.
They can also update firmware, download setpoints to
USB, and upload setpoints from USB.
Administrator Level—Default: 2425
Administrator Level users have system administration
access and can change the date and time, schedules,
and all setpoints and configurations, including default
passcodes. They can also update firmware, download
setpoints to USB, and upload setpoints from USB. They
can change network configurations and can run system
tests and logs. This Level is normally reserved for quali
-
fied HVAC service personnel.
Edit Passcodes
WARNING: MAKE SURE YOU CHANGE THE PASS-
CODES AS SOON AS POSSIBLE TO SECURE THE
SYSTEM!
NOTE:
Only the Administrator Level can change passcodes.
From the
Administrator Settings Screen
,
touch
the
<Security>
icon. The
Security Screen
will appear.
See
Figure 6
.
Press
<Menu>
to return to the
Settings
Screen
.
On this screen, you have two options—Change Manager Password
and Change Administrator Password. Press your menu selection and
either the
Manager Password Screen
,
Figure 7
, or
Admin Password
Screen
,
Figure 8
, will appear.
Enter a 4 digit password using the keypad. The numbers appear in
bold at the top of the screen.
NOTE:
Do not use the same passcode for Administrator and
Manager passcodes. If you do, each passcode will default to Level 0.
Figure 6: Security Screen
Figure 7: Manager Password Screen
