Operating instructions for moisture analysers
UX 3081
UX 3081WQ
a&p instruments, Kluckhofer Weg 61, D-32657 Lemgo, Tel.:05232 97780, Fax.: 977820
E-Mail: [email protected], Internet: www.apinstruments.de
Seite 10
Date and time
Use ‘up’/ ‘down’ to set the date and press ‘set’.
Use ‘up’/ ‘down’ to set the month and press ‘set’
Use ‘up’/ ‘down’ to set the year and press ‘set’
Use ‘up’/ ‘down’ to set the hour and press ‘set’
Use ‘up’/ ‘down’ to set the minutes and press ‘set’
The date and time are shown on the printout
Buzzer
Use ‘up’/ ‘down’ and ‘set’
to activate or deactivate the buzzer, then press
.
‘set’ followed by ‘esc’.
Calibrating the scales
Tray carrier and tray must be on the balance!
Follow the menu instructions and use a F1 weight to calibrate the scales.
Tray being used
must be empty.
If the display shows
switch the power switch off and on, and try it again.
The reason for this, please look at “potential errors” on page 15
down
set
down
up
set
set
temp. C°
time
mode
value (weight)
unit
set
set
down
set
temp. C°
time
mode
value (weight)
unit
temp. C°
time
mode
value (weight)
unit
temp. C°
time
mode
value (weight)
unit
temp. C°
time
mode
value (weight)
unit
temp. C°
time
mode
value (weight)
unit
temp. C°
time
mode
value (weight)
unit
set
temp. C°
mode
value (weight)
time
unit
temp. C°
time
mode
value (weight)
unit
temp. C°
mode
value (weight)
time
unit
temp. C°
time
mod e
value (weight)
unit
temp. C°
time
mode
value (weight)
unit
temp. C°
mode
value (weight)
time
unit
