Operating instructions for moisture analysers
UX 3081
UX 3081WQ
a&p instruments, Kluckhofer Weg 61, D-32657 Lemgo, Tel.:05232 97780, Fax.: 977820
E-Mail: [email protected], Internet: www.apinstruments.de
Seite 3
Safety instructions
Always transport the device in an upright position
and protect it from impact.
Always operate the device on a
level surface, using a vibration-free base.
Avoid draughts.
Never touch the (luminous) heater when it is hot,
as there is a risk of injury!
Always disconnect the plug from the mains supply before
performing any work on the device (e.g. changing the heater)!
Repairs should only be carried out by a qualified technician.
Please take extra care when using flammable samples!
You may need to contact the manufacturer for advice.
Please be careful not to drop any sample particles
next to the tray support plate.
Carefully remove any particles with
a vacuum cleaner.
Only use accessories specifically designed for use with ULTRA X devices.
Do not move the device during measurement, as this will result in measuring errors.
Do not leave any substances in the measuring tray, if they are not being measured.
Devices should only be shipped in the original packaging using the original packaging material.
ULTRA X moisture analyzers are stand-alone units and are not designed to be used in continuous
production runs. Any such use is at your own risk.
!
!
!
