A&D TM-2657P, Инструкция по эксплуатации

Страница: 50 / 71

40
5) Time
This monitor has a built-in clock. The measurement data includes the date and time that a
measurement was taken.
The time is designed to be synced with the time of a receiver device side. Refer to the
specifications of the receiver device side.
NOTE
The clock in the monitor can be automatically set by the receiver device side function.
After the pairing, the time of the monitor is automatically set to the time of the receiver
device 2 minutes after power on if there are no operations, or at the start of first
measurement.
When the setting function F20 is off, the above clock synchronization is not performed.
6) Transmission specifications
Item Specifications
Standard
Bluetooth Ver. 2.1 class 1
compatible with SPP and HDP
Transmission output Class 1
Communication distance
Maximum of 100m (depends on usage)
Frequency band 2,402 - 2480 MHz
Modulation GFSK/QPSK
Maximum RF output power 20 dBm
※
This monitor may be changed for improvement without any prior notice.
7) CONTENTS OF TRANSMISSION
Transmission data
Systolic blood pressure, diastolic blood pressure, pulse rate, measurement time, ID
For more information, please contact the A&D ME Device Customer Response Center.