MC-2000, Version 2.6
I:MAN-MC2000USA
4
Money Counting Operation
MC-2000 USA Money Counter
Quick Operator's Guide
Coin scoop (aka cup) provided with your MC-2000 must be used for all loose coins
& must not be used with BILLS & COIN ROLLS.
Function
MC-2000 Status
Operator Action
1
Getting Ready
Turned Off with nothing
on platform.
Press
Warming up until dis-
play shows “USECUP”
Wait 5 seconds.
2
Count
COINS
Display shows
“USECUP”.
Ready to count COINS:
1¢, 5¢, 10¢, 25¢, $1
Place scoop of 1¢ on
platform, then remove
scoop & coins.
Repeat for each coin de-
nomination, using scoop.
3
Count
BILLS
Display shows “no CUP”
Ready to count BILLS:
$1, $5, $10, $20, $50, &
$100
Set scoop aside.
(not used for bills or rolls).
Place stack of $1 bills on
platform, then remove.
NOTE
:
if display shows “OVEr”,
remove part of stack until value
displayed, then continue.
Repeat for each bill de-
nomination (no scoop)
4
Count
ROLLS
Display shows “0.00”
Ready to count ROLLS:
1¢, 5¢, 10¢, 25¢, $1
Place 1¢ roll(s) on plat-
form, then remove.
Repeat for each roll de-
nomination (no scoop)
5
View total
(for 3 seconds)
Displays total for 3
seconds,
then returns to prior
mode.
Press at any time
View and
Clear Total.
Displays “Clrtot”,
then defaults to 1¢
mode, ready for new
drawer count.
Press & Hold
then press
TIP #1
:
ENTER/COINS/BILLS/ROLLS
keys allow you to move from any denomination to another. Ex-
ample: if you have no $1 coins, press
BILLS
or
ENTER
(with nothing on platform) to move to $1
bill mode. Annunciators tell you which mode you are in.
TIP #2
: MC-2000 should be used on a solid table surface with all leveling legs secure (so unit doesn’t
“teeter”). Avoid heavy air drafts and table vibrations.
TIP #3
: Review user-adjustable F settings –
especially F10
- for maximum speed & accuracy.
ON
OFF
TOTAL
Sample
ZERO
Clear
TOTAL
Sample
