A&D MC-1000, Инструкция по эксплуатации

Страница: 26 / 77

24
8-4 Calibration Using an External Weight
This function calibrates the balance using an external weight.
When the MC-1000 is used
1 Connect the AC adapter and warm up the balance
for at least 30 minutes with nothing on the pan.
2 Press and hold the CAL key until
Calout
is
displayed, then release the key.
3 The balance displays Cal 0 .
 If you want to change the calibration weight (a
list of usable weights is shown on page 22),
press the SAMPLE key and proceed to Step 4.
 If you use the calibration weight value stored in
the balance, proceed to Step 5.
4 Specify the calibration weight value as follows:
SAMPLE key To switch between the
calibration weight selection
mode (All of the digits blinking)
and the value adjustment mode
(The selected digits blinking).
With the MC-1000, the digits in
the 2
nd
, 3
rd
, and 4
th
decimal
places can be adjusted.
With the MC-6100, the digits in
the 2
nd
and 3
rd
decimal places
can be adjusted.
RE-ZERO key To select the calibration
weight (All of the digits
blinking) or adjust the value
(The selected digits blinking).
Refer to page 22
PRINT key To store the new weight
value. Even if the AC
adapter is removed, the data
is maintained in non-volatile
memory.
CAL key To cancel the operation and
return to 1
Cal 0
.
To next page
Select a
weight
Press and
hold the key
Release
the key
e.g. Calibration
weight value
200.0123 g
Press