EN
6
3.
Display Symbols and Key Operations
Display symbols
Key Operations
The behavior of the balance differs depending on whether ”Press and
release the key immediately” or ”Press and hold the key (for 2
seconds)”. The normal weighing operation is to ”Press and release the
key immediately”. Do not hold down the key unless you need to.
Key
When pressed and released
When pressed and held (for 2 seconds)
Turns the display ON / OFF. The standby indicator is displayed when the display is turned off.
The weighing mode is enabled when the display is turned on.
The
key is available anytime. Pressing the
key during operation will
always turn the display OFF.
In the weighing mode, turns the digit for
readability ON / OFF.
In the counting or percent mode, enters the
sample storing mode.
Displays the menu of function table.
Switches the weighing units stored in the
function table.
Enters the mode for changing the weighing
speed.
Enters the calibration mode (One
-
Touch
Calibration) using the internal mass (FZ
-
i
/
FZ
-
i
WP / FZ
-
GD series only).
In the internal setting mode, the operation is
canceled.
Enters the calibration mode using an external
weight (with your weight).
When stable, outputs the weighing data
according to the function table.
In the function table, confirms the operation.
No function at the time of shipment.
Outputs "Title block" and "End block" for GLP,
GMP, etc. report by changing the function
table.
Sets the display to zero.
・
Number of statistical data (Statistical calculation mode)
・
Displays the weight data relative to the weighing capacity,
in percentage, in the weighing mode (Capacity indicator)
Response indicators
Animal mode indicator
Comparator indicators
Units (pcs, ct, mom)
Units (g, %)
Interval output mode
standby indicator
Weight data
Interval output mode
active indicator
Blinking
Processing indicator
Processing indicator
Stabilization indicator
Standby indicator
Press and hold the
key for 2 seconds
Press the key
(Press and release
the key immediately)
Содержание FZ-i Series
