Aamstamp AAMStamp Sprite, Инструкция по эксплуатации

Страница: 9 / 20

8
CHOOSING THE PROPER CUSHION BOARD
Cushion Boards are made of polyurethane material and are designed to give
cushion to your products while they are being printed.
Cushion boards serve two main purposes. They keep the type and dies from
penetrating your product while at the same time allowing the type and dies to gain
enough impression to give a crisp clear imprint.

HARD CUSHION BOARDS: For printing one or two small lines of type and
will keep the type from penetrating your product.

MEDIUM CUSHION BOARDS: Used most often, these cushion boards are
used for one to four line printing of 18 point or smaller type styles that have
medium to bold lettering.

SOFT CUSHION BOARDS: Used when doing more then four lines of print
or large print areas that contain big bold lettering.
AAMSTAMP ATTACHMENTS
AAmstamp attachments are designed to make printing particular products
easier. AAmstamp attachments are sold separately.
AAmstamp Currently has the following attachments available:
The 10 x 12 Base Plate
Optional Ribbon Guides for Base Plate
Optional Napkin Guide for Base Plate
Ribbon Supply Spindle
AAmstamp Gauge Bar with side guide
Napkin Guide
Pencil Attachment Guide
Poker Chip Fixture
Wire Marking Fixture
Shrink Tubing Fixture
Multi-Purpose Gauge Bar
The multi-purpose gauge bar is used as a hold down clamp for other attachments
such as cushion boards, match guides, etc.. The gauge bar will hold the attachments
firmly in place and has measuring marks to center the attachment being used.