Installation and Operating Instructions
3
Read These Warnings First
EZYTAP
The EZYTAP75/75T comes with a High Performance 4ltr Undersink Boiler. It also dispenses Ambient Water.
The EZYTAP85/85T comes with a High Performance 8ltr Undersink Boiler. It also dispenses Ambient Water.
The EZYTAP7800/7800T comes with a high performance 4ltr Undersink Boiler. By adding an Undersink Chiller
(UC800M) it also dispenses Chilled Water.
The EZYTAP8800/8800T comes with a high performance 8ltr Undersink Boiler. By adding an Undersink Chiller
(UC800M) it also dispenses Chilled Water.
The EZYTAP75/85/7800/8800 have a dispensing height of 18.5cm.
The EZYTAP75T/85T/7800T/8800T have a dispensing height of 24cm.
The Undersink Chiller (UC800M) can be replaced by any of the Cosmetal Undersink Chillers H20MY IN (CEH2IN15), J
CLASS IN (CEJIN45), Nigara IN (CENIN120C8). Please note you will need some different connections if using these
models.
UNIQUE SCALE PREVENTION SYSTEM
The EZYTAP has two separate mains water inlets. One feeding the Boiler and the other feeding the Ambient or
Chilled side. This provides the unique opportunity to protect the Boiler from scale by connecting a proper Scale
removal Filter to the Boiler water inlet side whilst connecting the Ambient or Chilled inlet to a simple odour and
taste Carbon Block Filter.
In Hard Water Areas the Scale removal Filter will reduce the need for regular descaling. Separately connecting the
Ambient or Chilled water inlet to a Carbon Block Filter will avoid reducing the life of the Scale Inhibiting Filter by the
amount of cold water that would flow through it if the Scale Inhibiting Filter was to serve both sides.
In a soft water area, the EZYTAP only requires a SINGLE Carbon Block Filter to connect to the mains water inlets.
•
Please read all installation requirements, installation procedures
and precautions before installing the EZYTAP water boiler.
•
Never attempt to install any water dispenser without reading all of
the applicable instructions.
•
All electrical connections must comply with current wiring rules.
•
This appliance is not designed for use by young children without
supervision.
•
This appliance must be earthed.
•
If the power supply cord is damaged, it must be replaced by a
qualified electrician.
•
Do not remove the cover of the appliance under any circumstances
without first isolating the appliance from the power supply.