Installation and Operating Instructions
11
EZYTAP 85(T)/8800(T) Installation Instructions & Tips
1.
Determine a convenient location to mount the EZYTAP faucet on your worktop. This can be an existing
faucet hole, or you may need to drill a new 30/35mm hole into your worktop. If installing with the EZYTRAY
refer to the instructions provided with the EZYTRAY.
2.
Ensure adequate cupboard space and ventilation for installation of the boiler and chiller (If supplied)
3.
Ensure power is within 1.2 metres of the boiler and chiller (if supplied).
4.
Ensure a potable water source is available for connection to the units.
5.
Configure the filtration and plumbing connections according to your circumstances (see page 5)
Please note
all installations should include an installation rail with Water block and Pressure reducing valve.
6.
Do not
use an electrical extension cable.
7.
The thickness of the worktop must be less than 70mm.
8.
All electrical and plumbing connections must comply with local legislation.
NOTE:
The Boilers and Chillers must be so positioned in relation to each other and to the TAP and mains inlet
that the connecting hoses are not twisted or kinked.
NOTE:
Do not lengthen the hoses, as this could impair performance.
9.
Once the water connections have been made, power on at the mains plug and switch on the circuit breaker
on. Two dashes will be displayed on the tap.
10.
Hold down the power button for 8 secs to power the machine on.
11.
It will show LO on the tap (it will show this until the water reaches the bottom probe and will then change to
a flashing H, which indicates the machine has started heating)
12.
Once the H has become solid the machine is ready for use.
13.
To dispense hot water, press the safety button and then press the hot button. To stop dispensing press the
hot button again and the light will go out.
14.
To dispense Ambient or chilled water press
*** Press and Hold the Power button
for 8 seconds to turn the power on
*** Press the safety button and then the
hot button to dispense hot water.
Press the hot button to stop dispensing.
*** Press the Ambient/chilled button to dispense
Ambient/chilled water.
Press the Ambient/chilled button to stop dispensing.