Aaeon SBC-860, Руководство пользователя

Страница: 89 / 93

F u l l - s i z e C P U C a r d S B C - 8 6 0
Chapter4 Drivers Installation
4 - 5
4.3 Installation 3:
Applicable for Windows NT 4.0
1. Insert the
SBC-860 CD ROM
into the CD-ROM Drive.
2. Start system with Windows NT 4.0 installed.
IMPORTANT:
When the "Please select the operating system
to start..." message is displayed, select "Windows NT
Workstation Version 4.00 [VGA mode]".
3. From
Start
, select the
Settings group
, then click on the
Control Panel
icon.
4. In the
Control Panel
, select the desired device and click on
the icon.
5. Follow the step-by-step instruction and click on
OK
button.
6. Click on the
Have Disk...
button.
7. Key in CD-ROM path and specify component drivers, then
click on the
OK
button.
8. From the list of displayed devices, select your desired device.
9. If a message appears stating the driver is already installed on
the system, and asks if you want to use the current or new
drivers, be sure to select the
New
button.
10. If prompted for the driver diskette a second time, click on the
Continue
button.
(Notice: In some cases the system will ask you to insert
Windows NT CD ROM. Follow its instructions to
complete the setup procedures.)
11. When the message
“The drivers were successfully
installed”
is displayed, remove the display driver diskette, then
click on the
OK
button.
12. Reboot the system.