AADI RDCP600, Руководство по развертыванию

Страница: 57 / 91

JANUARY 2010 - TD 220a DEPLOYMENT GUIDE, RDCP600 Page
57
Reliable solutions
2.2.1 Deployment Guide
Tap the Wizard button in the
Deployment
Setup
to set up the configuration or do the
configuration in
Start menu → Deployment Setup
→ Edit → Wave
Refer Figure 2-4 for an illustration of the Wave
configuration.
Select
Acoustic based wave
from the Wave
module selection.
Press the
Acoustic wave
tab for further setup.
Figure 2-5 shows an overview of the timing
sequence and number of samples collected for a
single wave measurement using the current
timing scheme.
The
Acoustic wave samples
are changed
according to the Acoustic wave duration, which
is set in
Timing Configuration
, refer Figure 2-6.
It is common to set the acoustic wave duration to
about 15-20 minutes (1800 – 2400 samples)
Number of samples equals can be calculated as
the Acoustic wave duration in seconds x 2.
Figure 2-4 Acoustic based wave.
Figure 2-5 Recording interval.