manualshive.com logo in svg

a2b Shima, Руководство пользователя

Поделиться
Скачать
a2b Shima Скачать руководство пользователя страница 25

23

5.3 Charging the battery

Charging time                                        Hours

Exhausted battery                                      12
Completely discharged battery                   4 - 5

To maximise battery life, recharge as soon as possible after every 
use. 

 Do not leave the charger with connected battery switched on 

longer than 12 hours. Disconnect the mains connector of the charger 
from the wall outlet and then disconnect it from the battery as soon 
as the battery is charged.

 Do not charge the battery in ambient temperatures below 0 °C or 

above 40 °C. Charge the battery at room temperature if possible.

  You may charge the battery at any time regardless of its 

charged state. Over time your battery will lose its charge capacity. 
If maintained and handled well, your battery should keep up to 80 
% of its capacity for at least 500 charging/discharging cycles. The 
decreasing capacity will become noticeable in the gradual reduction 
of the maximum range. When the range is insufficient, you may 
acquire a replacement battery from your A2B specialist dealer.

Low battery charge 

The motor controller and Battery Management System (BMS) will 
automatically switch off the electric power supply to the motor 
as soon as the battery charge drops to a pre-defined value. This 
protects the battery from the harmful effects of an exhaustive 
discharge.
When the current switches off due to a low battery charge, you 
must connect the battery to the charger that you received with 
your A2B no later than after 3 days for recharging. Complete 
charging of a completely discharged battery will take 4 to 5 hours. 
If you have any questions about this battery or its usage, please 
contact your specialist dealer.

 Never attempt to use the remaining power once the BMS has 

switched off the battery. You will only damage the battery.

Содержание Shima





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды