manualshive.com logo in svg

a2b Shima, Руководство пользователя

Поделиться
Скачать
a2b Shima Скачать руководство пользователя страница 24

22

Owner´s manual

5.2 Charging the battery 

Your A2B specialist dealer should hand over to you a fully charged 
battery upon delivery of your A2B. Otherwise please ensure that 
you charge the battery for your A2B for at least 12 hours before 
first use.

1. Check the voltage selector switch on 
the charger to guarantee that it is set to 
your mains voltage (230 V for Europe).

 
2. Plug the charger into a wall outlet.. The 
charger must be switched off (OFF). 

 

3. Make sure the plug pins are aligned 
correctly and connect the charger to the 
battery by plugging the connector into 
the charging socket.

4. Switch on the charger with the operat-
ing switch (ON).

5. LED lights:  
The power LED will illuminate 

RED

 when 

the charger is connected to the mains and 
the operating switch is switched on (ON).
The indicator LED will illuminate 

ORANGE

 

whilst the battery is being charged.
The indicator LED will switch to 

GREEN

 as soon as the battery is 

charged completely.

6. After the completed charging process (indicator LED glows 
GREEN) switch off the charger at the operating switch (OFF)

7. Disconnect the mains connector of the charger from the wall 
outlet and then disconnect it from the battery by carefully pulling the 
connecting plug from the charging socket.

8. Your battery is now ready for operation.

 NOTE: The battery cannot be charged if you connect it whilst the 

charger is switched on.

FUSE

5

3

2

4

1

Содержание Shima





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды