manualshive.com logo in svg

a2b Shima, Руководство пользователя

Поделиться
Скачать
a2b Shima Скачать руководство пользователя страница 10

8

Owner´s manual

3.2 Changing components or attaching accessories

Before you install any components or accessories (including other 
tyres), ask your Hero Eco specialist dealer whether these are 
suitable for your A2B. 
Read and comply with the instructions of the respective 
components or accessories which you have purchased for your 
A2B. Follow the manufacturer's instructions for the components or 
accessories if they differ from these instructions.

  Just as for all mechanical components, your A2B is also 

subject to a certain degree of wear. Especially in cases of high 
loads, attention must be paid to wear characteristics. When 
the useful life of a component is exceeded it can cause the 
unexpected functional loss of this component, resulting in 
serious injuries or even death. Therefore, pay attention to wear 
characteristics such as cracks, scratches and changes in colour 
at highly stressed points on the frame, fork, running wheels and 
handlebars which would indicate that the useful life has been 
reached or exceeded. Have your specialist dealer immediately 
replace worn components. 

  If any components or accessories are not checked for 

suitability and if they are not installed, used and maintained 
properly, then this may result in serious injuries or even death. The 
use of non original components or spare parts can jeopardise the 
safety of your A2B, causing the warranty to expire. 

A2B maintenance schedule

Your A2B should be professionally maintained by an A2B specialist 
dealer at regular intervals. Read the information in chapter 13.0 
(pg.39) to that effect.

 The replacement of components or installation of accessories 

occurs at your own risk, since these parts have not been checked by 
Hero Eco for suitability, reliability or safety with your A2B.

3.3 Brake lever adjustment

Can you comfortably operate the brake lever? If not, take your A2B 
to your A2B specialist dealer and ask them to adjust the angle of the 
brake levers.
Otherwise you can adjust the brake lever angle yourself:
1. Loosen the screw under the brake lever with an appropriate Allen 
key.
2. Adjust the angle as required.
3. Re-tighten the screw and ensure that the brake lever is securely 
fixed in position.

 To adjust the brakes you should take your A2B to an A2B 

specialist dealer.

Содержание Shima





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды