09/2021
Page 9
Installation and Operating Instructions
UPS Edition One 1kVA, 2kVA, 3kVA
2. Installation and setup
NOTE:
Please check the unit before installation. Make sure that nothing in the packaging
is damaged.
The packaging is recyclable. After unpacking, please keep it for reuse or dispose
of it properly.
2.1 Unpack checking
■
Do not tip the UPS when removing it from the packaging.A general risk of
tipping always exists with units with a high centre of gravity.
■
Check whether the UPS has been damaged during transport and do
not switch on the UPS if damage is detected. Please contact the dealer
immediately.
■
Check the accessories against the packing list and contact the dealer if any
parts are missing. Accessories include:
UPS user manual, software suite CD, USB cable, Mains cable (input and
output), RS232 cable.
2.2 Device view
Nameplate
On the type plate of the UPS you will find the following information:
Example: a-tronix UPS Editon One 1 kVA – Model:
■
the serial number
■
the model
■
the capacity of the unit
■
Connection conditions input
■
Connection conditions output
■
the battery power
■
the protection class
■
Indication of the short circuit currents
Always compare the type plate of the unit and these operating instructions to
ensure that they are the same.
This prevents incorrect use of the instructions and the UPS.
