09/2021
Page 13
Installation and Operating Instructions
UPS Edition One 1kVA, 2kVA, 3kVA
Step 4: Communication link
Communication port:
To allow for unattended UPS shutdown/start-up and status monitoring, connect
the communication cable one end to the USB/RS-232 port and the other to the
communication port of your PC. With the monitoring software installed, you can schedule
UPS shutdown/start-up and monitor UPS status through PC.
The UPS is equipped with intelligent slot perfect for either SNMP or Relay card.
When installing either SNMP or Relay card in the UPS, it will provide advanced
communication and monitoring options.
NOTE:
USB port and RS-232 port can’t work at the same time.
Step 5: Turn on the UPS
Press the ON button on the front panel for two seconds to power on the UPS.
NOTE:
The battery charges fully during the first five hours of normal operation. Do not
expect full battery run capability during this initial charge period.
Step 6: Install software
For optimum protection of the computer system, install the UPS monitoring software to
fully configure the UPS shutdown.
You will find the corresponding software on our homepage.
In the accessory bag you will find the software installation instructions of the
long-established software operator Megatec which you can download from the website
megatec.com.tw (Software UPSilion 2000).
There you will also find the required serial number.
We offer this software as an additional option to our own software.
