Page 22 09/2021
Installation and Operating Instructions
UPS Edition One 1kVA, 2kVA, 3kVA
3.3 UPS settings
The UPS has setting functions. This user settings can be done under any kind of UPS
working mode. The setting will take effect under certain condition. Below table describes
how to set the UPS.
The setting functioniscontrolled by 4buttons (UP, DOWN, ON / ENTER, OFF / ESC):
UP
▲
+ OFF / ESC
▼
goes into the setting page.
ON / ENTER
confirm the settings options.
UP
▲
+ DOWN
▼
value adjustment Or for choosing different pages.
After the UPS turn ON, press buttons
▲
+
▼
for 5 seconds and then goes into the setting
interface page.
NOTE:
To exit the setting mode and confirm your selection, press the „DOWN“
button until the LCD displays the last selection in UPS setting mode.
The LCD then jumps back to the display in power-on mode.
Item
Interface Description
Content Displayed
Mode setting
Press Enter button to change the
setting (
ECO
or
NOR
or
CF
or
GEN
):
ECO – UPS runs in bypass mode
NOR – Normal mode
01
CF – frequency converter mode
GEN – the UPS can be connected
to a generator
Press UP
▲
button
to select the previous setting.
Press DOWN
▼
button
to select the next setting.
